Landscape Lighting

glolite[1].gif

Diameter 77mm /
3 inches
overall height 16 mm / 0.6 inches
12 Volt

4 Watt
Available in many Colours

GLO-LITE
These flush-mounted light points are ultra strong and very suitable for use as integrated lighting for paths where there is a lot of traffic, pedestrian or otherwise. The lens can, furthermore, be removed and adjusted to suit the colour of the background. Combining the orienting feature of Glo-lites with an above-ground lighting system such as the AMLS-11A creates a pleasant atmosphere.
Glo-lites are easy to mount in wood, various types of concrete products and natural stone.
DB-LED-CW-0.5 Watt.jpgDiameter 22 mm / 0.9 inches, overall height 35 mm / 1.4 inches
LED, Cool White, 100,000 burning hours
DB-LED (CW)
The bright spot for every garden, terrace or patio. Gives a striking accent of 'Cool White' LED light that is also visible during the day. The fixture is subtle but seen and easy to install. Combines beautifully with all the other fixtures in the Solitary, Wall or Spot series, and goes particularly well with AMLS-11A LED.  Impact-resistant polycarbonate filled with a special resin.
 DB-LED-WW-0.5 Watt.jpgDiameter 22 mm / 0.9 inches, overall height 35 mm / 1.4 inches
LED, Warm White, 100,000 burning hours
DB-LED (WW)
The bright spot for every garden, terrace or patio. Gives a striking touch of 'Warm White' LED light that is also visible during the day. The fixture is subtle but seen and easy to install. Combines beautifully with all the other fixtures in the Solitary, Wall or Spot series, and goes particularly well with AMLS-11A LED.  Impact-resistant polycarbonate filled with a special resin.
FLH-LED-010(1)2 watt.jpg

Diameter 60 mm / 2.4 inches, optional ring 80 mm / 3.2 inches, overall height 40 mm / 1.6 inches
LED, Warm White, 100,000 burning hours

FLH-LED010 (WW)
The LED lighting in this Integrated series spreads the light attractively. These LEDs give a 'Warm White' light, which enables combinations with other materials, for example, fired bricks and cobbles, but they can also be used in lawns and borders.
With the aid of various rings, the fixture can be built in (stainless steel ring ø60 mm / ø2.3 inches) or surface mounted (stainless steel ring ø80 mm / ø3.2 inches).  Impact-resistant polycarbonate filled with a special resin / stainless steel ring.
Light reach
± 3 metres / 10 feet, spread light
 FLH-LED-011(1)2 Watt.jpg

Diameter 60 mm / 2.4 inches, optional ring 80 mm / 3.2 inches, overall height 40 mm / 1.6 inches
LED, Cool White, 100,000 burning hours

 

FLH-LED011 (CW)
This LED spreads a 'Cool White' light in a very pleasant manner, just like the previous fixture in the Integrated series. Because the LEDs are cast, a diffuse atmospheric light is created which is particularly effective in an architectural setting and in combination with natural stone and wood.
With the aid of various rings, the fixture can be built in (stainless steel ring ø60 mm / ø2.4 inches) or surface mounted (stainless steel ring ø80 mm / ø3.2 inches). Impact-resistant polycarbonate filled with a special resin / stainless steel ring.
Light reach
± 3 metres / 10 feet, spread light 

   View Entire lighting Product Line
This line is available through custom orders.
 
asl2[1].gif
 
BHFS-1(2)a.jpg
 
FISH-EYE-WALL(1)a.jpg
 
LED-270-1(1)a.jpg
 
AWLS-3(1)a.jpg
 
FISH-EYE-LOW(1)a.jpg